Solids Control Equipments Manufacturer

Home > Service > Drilling mud tank manufacturer

Drilling mud tank manufacturer

2012-09-27

Mud tanks are the base of solids control equipments, such as shale shaker, mud cleaner, centrifuge, etc., and also the carrier of drilling fluids. Mud tanks for solids control systems are divided into Square tanks and Cone-shaped tanks according to the shape of the tank bottom.

DC Drilling mud tank

DC Machinery manufactures high quality mud tanks. Our tanks are widely used in oil and gas drilling, HDD, CSM exploration, slurry separation, etc. They are high anti-corrosive, anti-rust, long usable life.

The body of the tank is made of welding the steel plate and section, using the flat cone-shape structure or the corrugated structure. The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate which is produced by the professional factory, the mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably. The surface of tank is equipped with water pipeline for cleaning the surface and equipment on the mud tank, we use soaked zinc processing for the netted steel plate. The ladder is made of the channel steel to take responsibility the body, the foot board is made of the linearity netted steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.

Quantity of mud tank needed

The numbers of the mud tanks that are needed on the drilling rig depend on the depth of the well, and also the mud demands of drilling. A tank is sectioned off into different compartments.
A compartment may include a settling tank, sometimes called a sand trap, to allow sand and other solids in the drilling fluid to precipitate before it flows into the next compartment. Other compartments may have agitators on the top of the tanks, which have long impellers below inserting into the tank & stirring the fluid to prevent its contents from precipitating. Mud guns are often installed on the corners of the tanks’ top, spraying high-pressed mud to prevent the drilling fluids in the corner of the compartment from precipitating, typically for the square tanks.

DC Machinery manufacture varies of mud tank/water tank, oil sludge tanks, Oilfield three runner design Skid mounted tank, with galvanized grating, safe handrail, coated with Marine corrosion-resistant zinc rich epoxy coating and paining, two layers for inside tank, three layers for outside tank.
If you are interested in high quality tanks, please contact us.