Solids Control Equipments Manufacturer

Home > Service > How to maintain the vacuum degasser in drilling site?

How to maintain the vacuum degasser in drilling site?

2015-09-30

After the vacuum degassing device is used, the rotor and the suction tube in the vacuum tank should be flushed. Cut off the power, remove the hole blocking plate, check the spare parts to ensure they are not damaged. And remove the foreign body in the tube, flushing tank wall and rotor with the high pressure water pipe .


It should be carried out the above cleaning work after being used every time, to ensure normal use of the next time.

Every other month, fill the spindle bearing with grease by a grease gun, the amount of filling is 200ML.

After using in winter, you should release the seeper in the steam water separator and pump timely to prevent the cracking.