Mud cleaners designed and manufactured for petroleum drilling fields

Mud cleaners are the common equipment of mud cleaning system which have the advantages of small area, less maintenance cost and more  Flexibility.

Today. DC Machinery designed and manufactured 3 sets mud cleaner for a petroleum drilling fields contract company according to users specifical request. 

Traditional mud cleaners use multiple 4 or 5cyclones, mounted over a vibrating screen, and are able to effectively process 400-600 GPM.   The process capacity is limited by screen capacity and its ability to discard dry solids.   With the introduction of linear motion vibrating screens, the capacity of the mud cleaner screen has been greatly increased.   This, in turn, allows the use of additional hydrocyclones and higher, overall process capabilities.

And the morden mud cleaner can has many cyclones combination models which can meet all treating capacity requirements. Several hydrocyclones are used to increase the flow rate of the mud. There is also a combination of varying sized hydrocyclones. Smaller cones, typically 4" in diameter known as desilters, remove finer silt sized solids, while the larger cones typically 10" in diameter known as desanders removed the coarser sand sized particles.

If you want to know about the combination models of the mud cleaners, please contact DC Machinery at anytimes. 

Related Reading

Shale shakers and mud cleaner delivery to Dubai

Shale shakers and Mud cleaners were finished and prepared for delivery to Iraq

Hot sales model linear motion shale shaker and mud cleaner delivery

The mud desilter shipped to Malaysia for building construction

Not paint drilling vacuum degasser texing acceptance before ex-factory