Solids Control Equipments Manufacturer

Home > Service > Submersible Slurry Pumps for Solids Control System

Submersible Slurry Pumps for Solids Control System

2014-07-29

Submersible Slurry Pumps

Submersible slurry pump is a cantilevered, vertical shaft driven submerged slurry pump designed to work over sumps and pits to transfer abrasive large particles and high density slurries. DCYZ submersible slurry pumps do not require a shaft seal and can be run dry for long periods with no damage to pump components.

YZ Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles. The length of inserting the water by slurry pump is between 800 and 2000, the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

Submersible Slurry Pumps

Slurry Pump Model Meaning: 80-YZ80-20A

YZ - Vertical Submersible slurry pump

80 – Pump outlet diameter (mm)

80–Pump design flow rate (m ³ / h)

20 –Pump design head (m) 

A –Impeller first to be cut less

Pump's drive type: The slurry pump is connecting through the flexible coupling and the electric motor, the pump direction of rotation is clockwise from the prime move.