Solids Control Equipments Manufacturer

Home > Service > The installation and operation of vacuum degasser

The installation and operation of vacuum degasser

2013-01-28

Vacuum Degasser is a special-purpose device for the treatment of gas in the drilling fluids. It can get rid of various gas of invasive drilling quickly. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost.

 

Also, at the same time vacuum degasser can be used as a heavy-power agitator and supported applicable to all types of mud circulation purification system.

 

How to install and operate vacuum degasser?

1 The installation of vacuum degasser is required connect stably, reliable fastening, the exhaust port is installed on the safe place.

2 Before starting the vacuum degasser, the tail end of bleeder tube and suction pipe should be dipped in the mud at the same time, otherwise, it will be unable to work.

3 After starting the vacuum degasser, check up the direction of rotation of motor, the motor direction of rotation should be consistent with the tank and pump direction of arrow.

4 When running, check vacuum gauge at any time, the reducing valve should be adjusted to ensure the equipment normal running.

5 The vacuum degasser must be test running once a week and keep maintenance.