Shale Shaker
Drilling fluid shale shaker is the primary processing equipment in solids control system, used for separating larger cuttings from drilling mud, and it plays an important role in protecting drilling fluid performance. The shale shakers produced by DC Machinery have the advantages of large handling capacity, screening high precision, low-energy, environmental protection and so on. DC Machinery supplies high quality shale shakers, including Linear Motion Shale Shaker, Balanced Elliptical Motion Shale Shaker, etc.

Drilling fluid Shale Shaker

Drilling fluid Shale Shaker

Dual Motion Shale Shaker

Dual Motion Shale Shaker

Hi G Dry Shaker

Hi G Dry Shaker
The shale shaker produced by DC Machinery has absorbed the advanced technology of design and manufacture, the structure has been optimized, therefore can clean the harmful solid phases in drilling mud effectively and guarantee the efficient recovery of drilling fluid. It is the most cost-effective product in domestic.
DC Machinery can produce all kinds of shale shakers with different sizes and types, can meet the requirements of different handling capacity and installation sizes. Also, DC Machinery can produce duplex or triplicate shale shakers according to the actual requirements of clients and supply the corresponding pipelines.
In order to supply the excellent shale shaker with high screening accuracy, low-energy and no dust pollution, DC Machinery controls quality strictly in each procedure.
1. To guarantee the durable structure of shale shaker, the material is the GB steel from Beijing Shougang Company Limited, Shanghai Baogang Iron and steel Co., Ltd. and Tangshan Iron and steel Co., Ltd.
2. The vibration motor is from the Italia joint venture company named Oli. The motor has many advantages, like high strength vibration, large screening area, adjustable screen box angle, little noise, excellent performance and high efficiency.
3. The whole screen box has been heat treated, and there is anticorrosive coating on the surface to keep a long life of shale shaker.
4. The area of shaker screen and handling capacity are large, the treatment effect is excellent.
5. Use the full adhesive edge hooked rigid shaker screen and plate closed fixture, it is convenient and easy to replace the screens and can be changed into many kinds of screens.
6. Design the height of storage tank on the shale shaker reasonably to make the fluid buffer and flow, reduce the impaction by the fluid on the shaker screen, then extend the service life of shaker screen.
7. Using thermal relay overloading and open phase protection of electric control cabinet to guarantee the safety of the operators.
Linear motion shale shaker is the primary processing equipment of solid control system, it is used for separating the large drilling cuttings from drilling fluid, and it plays an important role in protecting drilling fluid performance.
- Adopt Italy OLI brand motors which have the advantages of high strength vibration, large screening area, adjustable screen box angle, little noise and high efficiency.
- Heat treatment of the complete shaker deck.Surface painting with heavy anticorrosion to extend the service life of shale shaker.
- Use the full adhesive hookstrip rigidity screen or steel frame screen, the fixed tensioning plate can make to replace screen more convenient and easier and also can replaced into many kinds of screens.
- Reasonable designing the cofferdam height of shale shaker logging tank can make mud buffer is uniformity flow, reduce direct impact on screen and effective extend the screen service life.
- We can manufacture dual or thribble shale shaker according to clients’ requirements.
Linear Motion Shale Shaker Parameters
Model |
DCZS850-2K |
DCZS700-3G |
DCZS630-3K |
DCZS830-3G |
DCZS585-4K |
Vibrating Mode |
Linear Motion |
||||
Motor Power |
2×1.5kW |
2×1.5kW |
2×1.5kW |
2×1.72kW |
2×1.72kW |
Vibrating Strength |
≤7.0G |
||||
Amplitude |
5~6mm |
||||
Treating Capacity |
80 m3/h |
110 m3/h |
120 m3/h |
130 m3/h |
130 m3/h |
Deck Adjustment |
-1°~5° |
||||
Electric Specs |
380V/50HZ or 460V/60HZ or Customized |
||||
EX Standards |
Ex dⅡ BT4 |
||||
Screen Qty |
2 panel |
3 panel |
3 panel |
3 panel |
4 panel |
Screen Specification |
850×1250mm |
700×1050mm |
630×1250mm |
830×1080mm |
585×1165mm |
Screen Area |
2.12 m2 |
2.2m2 |
2.36m2 |
2.7m2 |
2.73 m2 |
Screen Type |
Steel Frame |
Hookstrip |
Steel Frame |
Hookstrip |
Steel Frame |
Dimension |
2260×1860×1380mm |
2700×1620×1500mm |
2510×1720×1500mm |
3310×1650×1580mm |
2900×1700× |
Weight |
1280kg |
1580kg |
1680kg |
1750kg |
1800kg |
Remark |
Specific gravity of mud treated by shale shaker is 1.2g/cm3 ,viscosity:45S,API 40 |
Dual Motion Shale Shaker
DCPTS Dual motion shale shaker is the lastest developed product manufactured by our company which can realize both linear motion and balanced elliptical motion,converting movement trajectory according to the site conditions to get the optimum efficiency of mud processing,it is the most advanced and cost-effective shale shaker at present.
To the poor formation lithology DCPTS shale shaker has a good adaptability and outstanding advantages to fragile and clay stratum,it has the characteristics of treating capacity 20% larger than linear motion shale shaker,high drilling cuttings discharge speed,long service life of screens and small splash of drilling fluid.
Dual Motion Shale Shaker Parameters
Model |
DCPTS750-3K |
DCPTS650-4K |
Vibrating Model |
Linear+Balanced Elliptical Motion |
|
Motor Power |
1.72kW×2+0.4kW |
1.94kW×2+0.45kW |
Vibrating Strength |
≤6.0G |
|
Amplitude |
5~6mm |
|
Treating Capacity |
140 m3/h (616GPM) |
|
Deck Adjustment |
-1°~5° |
|
Electric Specs |
380V/50HZ or 460V/60HZ or Customized |
|
EX Standard |
Ex dⅡ BT4 |
|
Screen Qty |
3 panel |
4 panel |
Screen Specification |
750×1195mm 40~200mesh |
650×1195mm 40~200mesh |
Screen Area |
2.68 m2 |
3.11 m2 |
Screen Type |
Steel Frame |
Steel Frame |
Dimension |
2800×1764×1720mm |
3100×1764×1720mm |
Weight |
1800kg |
1900kg |
Remark |
Specific gravity of mud treated by shale shaker is 1.2g/cm3 ,viscosity:45S,API 40 |
Hi-G Dry Shaker
DC Hi-G Dry Shaker is a linear motion shale shaker,on the one hand,it is used to recover the mud from drilling cuttings of the main shale shaker and hydrocyclone,so as to reduce the mud waste and drilling cost;on the other hand,it makes the the liquid/oil content in the drilling cuttings to as low as about 10%(w/w),for the purpose of reducing environmental pollution.
1. High G-force vibration intensity(adjustable as per working conditions);
2. Make drilling cuttings more dryer;
3. Weir type feed box is more applicable to on-site process;
4. Fast drilling cuttings conveying speed and high handling capacity;
5. Screen frame tilt angle can be adjusted from -1°~+5°;
6. Wedge tensioning system ensures easy screen replacement;
Hi-G Dry Shaker Technical Parameters
Model |
DCGZ585-4K |
Vibrating Mode |
Linear Motion |
Motor Power |
2×1.94kW |
Vibrating Strength |
7.5G(adjustable) |
Capacity |
150 m3/h(660GPM) |
Deck Adjustment |
-1°~5° |
Electric Specs |
380V/50HZ Or 460V/60HZ Or Customized |
Certificate |
ExdⅡBT4 |
Screen Quantity |
4 panel |
Screen Specification |
585×1165mm,200~300mesh |
Screen Area |
2.73 m2 |
Screen Type |
Frame |
Dimension |
2900×1700×1500mm |
Weight |
1800kg |