Mud cleaner combinations of shale shaker and settling/centrifugal force are used together to provide an effective separation, it is the second stage remove equipment of solid control system.
Mud cleaners were developed in the early 1970s to remove fine drilled solids from weighted mud without excessive loss of barite and fluid. They have also proved valuable tools in closed systems and other dry? location? applications. These devices use a combination of desilting hydrocyclones and very fine mesh vibrating screens (120-400 mesh) to remove fine drilled solids while returning valuable mud additives and liquids back to the active mud system.
DC Machinery provide all kinds of mud cleaner, and design the special unit according to your needs. But usually our bottom shakers are DCS700-3, DCS584-4 and DCS630-3. Different power drill rig should equipped the different flow mud cleaners that determined by the size of hydrocyclones.
All DC Machinery units can be provided with 380V / 50Hz or 460V / 60Hz; generate a noise level less than 80 decibels (dB); and are fitted with an adjustable deck capable of inclinations of -2 to +5 degrees. When drilling top-hole sections, where heavy, high volume solids are typically encountered, the high G-Force design will effectively move the solids across the screens. All units come standard with explosion proof motors and enclosures.