Desilter is the third class equipment in solids control system, it is used to separate the solid particles whose diameter is 15-44μm from drilling fluid. . Usually the cone diameter is less than 6″is called Desilter, We commonly used 5 "and 4" cone in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter. DC Desilter works very well with solid control system other equipments.
Desilter produced by DC Machinery can be adjusted to control the handling capacity to match the different requirements. It is widely used in petroleum drilling and HDD (Horizontal directional drilling).
CNQ Mud Desilter Features & Benefits
1. Combined by the 4" or 5" hydrocyclones and pipes, the operation and adjustment are much easier.
2. The material of hydrocyclone is polyurethane, long service life, light weight and easy to maintain.
3. The bottom flow hole of hydrocyclone discharges the sand particles as an umbrella and the “wet bottom” discharging can make the particles be discharged quickly, and reduce the probability of bottom flow hole block.
4. The symmetrical inlet structure makes the hydrocyclone allocation more reasonable and the work more stable.
5. The inlet and outlet of hydrocyclone are equipped with ball valves, can adjust the number of working hydrocyclones at any time.
6. Shale shaker with the advanced small shaker screen has the advantages of large treating capacity, low noise and long service life of screen.
7. According to the clients' requirements of the handling capacity, the desilter can be made up by several groups of hydrocyclone.
CNQ Mud Desilter Technical Parameter
|Electric Specs||380V/50HZ or 460V/60HZ or Customized|
|Matching Shaker||Screen Specification||600×1600mm,120-300mesh|
|Screen Type||Soft Hookstrip|
|Remark||1.4" Cones =10～20m3/h2.The motor power of centrifugal pump choosed is according to drilling mud specific gravity 1.2g/cm3|