DCSLH series drilling fluid jet mud mixer is used to make and mix drilling fluid to change the density and viscosity. This device can satisfy the fluid weighting and mixing of drilling solids control system for 1500m-9000m drilling. Jet mud mixer consists of one centrifugal pump, one feeding hopper and one jet mixer. Generally, there are pipes and valves connecting all these parts, the mud hopper matched on the jet mud mixer always 4“and 6”.
The inner wall boundary, cavitation and erosion; swirl mixer pressure can’t bigger than 30% outlet pressure; the value of mixer should operation flexible and sealing reliable; each hoops and flanges joint should be sealed reliable and don’t have leakage. It is integrated with venturi hopper and mechanical seal jet mixing pump which are connected with manifold valve.
The drilling fluid jet mud mixer can help operators to get the ideal drilling fluid with good properties by adding bentonite, polymer and other powder additives. meanwhile, jet mixing pump and the hopper can be installed flexibly on a single skid, or on the skid at tank end or separately with the hopper on tank top and the pump at tank side.
China manufacturer DC Solids Control offer the world with drilling mud jet mud mixing. We are an exporter of drilling fluid jet mud mixer for Indian, Russian, Middle East. etc. Buy drilling cuttings jet mud mixer from China manufacturer. China leading technology, 100% Quality Control, Best pirce, Reliable service. Your best hydraulic bentonite mud mixer, drilling mud tank jet mixer deal starts here.